EXTENDER | AV ACCESS HDIP120 1080P HDMI OVER IP
EXTENDER | AV ACCESS HDIP120 1080P HDMI OVER IP
$1,325.00
1080P AV over IP Extender Kit, HDMI Extender w/ Loop Out, IR Remote Control, Plug & Play
- Extends 1080P@60hz HDMI signal up to 120m/394ft via a single Cat5e/6 cable
- Works easily with an Ethernet switch, no need to configure; real plug and play
- End-to-end latency: less than 0.1s
- HDMI local output & IR remote control
- Supports many-to-many configuration via VLAN configuration on the switch
Out of stock
Extend and Split with Ease:
Supports one-to-one and one-to-many applications. Transmits 1080P@60hz full HD HDMI signal up to 120m/394ft. Easily build an extender splitter combo with one transmitter and up to 10 receivers.
No Configuration Required, Plug & Play:
Works flawlessly with universal Ethernet switches, no dedicated IGMP Gigabit switch required. Set up within minutes, just plug and play.
Low Latency:
The end-to-end latency is less than 0.1 seconds, ideal for sports programs, movies, PC games, or video presentations.
HDMI Loop out & IR Control:
Connect the transmitter to a local monitor for easy preview or video splitting. And the included IR signal emitter and receiver allow you to control the source device at the receiver side.
AV ACCESS HDIP120 1080P HDMI OVER IP EXTENDERRelated Products
TOOL | NEXXT AW250NXT09 CABLE STRIPPER
TOOL | NEXXT AW250NXT09 CABLE STRIPPERHurry Up!
Offer ends in:
TOOL | NEXXT AW250NXT09 CABLE STRIPPER
TOOL | NEXXT AW250NXT09 CABLE STRIPPERThis Universal Cable Stripper with cutter is the complete combination of cutter and stripper to handle all your voice and data cable installations. One-tool cuts and strips shielded and unshielded twisted pair network cables, coaxial cables, and round and flat telephone cables, with diameters of 6 to 12mm. Quick and easy to use: it features preset strip lengths for most common connectors along with clear cable illustrations marked on the handle.
-
$90.00Add to cart
-
TOOL | IDEAL FT-45 FEED-THRU RJ-45 CRIMP
TOOL | IDEAL FT-45 FEED-THRU RJ-45 CRIMPHurry Up!
Offer ends in:
TOOL | IDEAL FT-45 FEED-THRU RJ-45 CRIMP
TOOL | IDEAL FT-45 FEED-THRU RJ-45 CRIMP-
$440.00Add to cart
-
SHELF | CANTILEVER NETWORK 1U
SHELF | CANTILEVER NETWORK 1UHurry Up!
Offer ends in:
CABLE | BELLCOM CAT5E PATCH CORD – 3FT
CABLE | BELLCOM CAT5E PATCH CORD – 3FTHurry Up!
Offer ends in:
CABLE | BELLCOM CAT5E PATCH CORD – 3FT
CABLE | BELLCOM CAT5E PATCH CORD – 3FTHigh-Speed Patch Cord
- Wired to the TIA/EIA 568C Standard
- 50u” Gold Plated RJ45 Snag Free Plug
- 100% Continuity Tested
-
$25.00Add to cart
-
SWITCH | HIKVISION DS-3E0508-E(B) 8-PORT GIGABIT ETHERNET
SWITCH | HIKVISION DS-3E0508-E(B) 8-PORT GIGABIT ETHERNETHurry Up!
Offer ends in:
SWITCH | HIKVISION DS-3E0508-E(B) 8-PORT GIGABIT ETHERNET
SWITCH | HIKVISION DS-3E0508-E(B) 8-PORT GIGABIT ETHERNET8 Port Gigabit Unmanaged Switch
DS-3E0508-E(B) switch is a layer 2 gigabit Ethernet switch, providing 8 1000M Ethernet ports to upload data via the convergence switch. The switch is reliable, easy to install and maintain, and equipped with rapid switch function. With multiple access ports, the switch is applicable for access or aggregation and upload of small-scale LAN devices.
-
$305.00Add to cart
-
PANEL | CABLE MATTERS 24-PORT CAT6 1U PATCH
PANEL | CABLE MATTERS 24-PORT CAT6 1U PATCHHurry Up!
Offer ends in:
PANEL | CABLE MATTERS 24-PORT CAT6 1U PATCH
PANEL | CABLE MATTERS 24-PORT CAT6 1U PATCHThe Cable Matters 24-Port RJ45 Patch Panel future-proofs your network connection for 10-Gigabit Ethernet. It offers 10G performance in compliance with the TIA/EIA 568-C.2 standard and is backward compatible with the previous cabling. Mount it to your racks, wall mount brackets, or cabinets and use the included D-rings and cable ties to reduce cable clutter
- Heavy duty 24 port patch panel supports Ethernet, made for Cat 6 cabling, but backwards compatible with Cat 5e and Cat 5 cabling.
- Future-proof your network connection for 10-Gigabit Ethernet with this durable RJ45 patch panel
- Install this Ethernet patch panel effortlessly in universal 19″ racks, cabinets, or wall mount brackets with 1U (1.75″) standard height
- Gold plated contacts ensure a correction free connection. Numbered ports and color-coded T568A and T568B wiring diagram give quick reference
- Network patch panel complies with the UL fire safety requirement (E486099). Use included D-rings and cable ties for easy cable management
-
$600.00Add to cart
-
Reviews
There are no reviews yet.